Difficulties: -I had a problem with my rebate joints, since I made them too large. - My box was asymmetrical, but the sander fixed it. Tools used: -Sander -Chisel -Mallet -Saw -Marking saw -Ruler -Square marker -Sandpaper -Hammer Images:

Today, we are going to continue our box: 1. Sand down the rebate joints. Sand down sawed edges. 2. Take the shorter larger piece (9 cm), and put it in one of the two rebate joints. Take 2 nails and nail them on the sides of the thin rebate joint side....

Today we are going to start our box: 1. Get a piece of wood, 50 cm long 2. Cut the pieces of wood: - 2x 19cm - 1x 9cm - 1x 8cm 3. Then, taking the two long pieces of wood, make one rebate joint on the right end. To see how to make a rebate joint, look...

Today we are going to use a small bit of wood to practice our rebate joints. How to make a rebate joint: 1. Measure the thickness of your wood. Mine was 12 mm thick. Then measure the half point of that on the side of the piece of wood. Measure 12mm down...