Today, we are going to continue our box: 1. Sand down the rebate joints. Sand down sawed edges. 2. Take the shorter larger piece (9 cm), and put it in one of the two rebate joints. Take 2 nails and nail them on the sides of the thin rebate joint side....

Today we are going to use a small bit of wood to practice our rebate joints. How to make a rebate joint: 1. Measure the thickness of your wood. Mine was 12 mm thick. Then measure the half point of that on the side of the piece of wood. Measure 12mm down...

Today we are going to start our box: 1. Get a piece of wood, 50 cm long 2. Cut the pieces of wood: - 2x 19cm - 1x 9cm - 1x 8cm 3. Then, taking the two long pieces of wood, make one rebate joint on the right end. To see how to make a rebate joint, look...

Difficulties: -I had a problem with my rebate joints, since I made them too large. - My box was asymmetrical, but the sander fixed it. Tools used: -Sander -Chisel -Mallet -Saw -Marking saw -Ruler -Square marker -Sandpaper -Hammer Images: